Paper jam in the paper support Press to turn off the printer. Right-click the Lexmark 3500-4500 Series icon. If the error reappears, replace the color print cartridge with a new one. Answered on Mar 13, 2012 Try to reset the printer's wireless network settings. All other trademarks are the property of their respective owners. If no number appears next to Photos: From the Lexmark logo drop-down menu, select Options.
From the left pane of the Welcome screen, click Fax. If you find a problem that cannot print from a digital camera using PictBridge, then we will try to provide the solution information for you, so you can print with Printer. Click Create E-mail to have your images attached to an e-mail message. Try to set a system restore point before installing a device driver. Try one or more of the following: Check document placement Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
From the Settings area in the left pane of the Welcome screen, click Setup and manage faxes. Make sure the selected network is set up and working properly, and that all relevant devices are turned on. Press to align the cartridge. Print speed is slow These are possible solutions. Close the scanner unit, making sure to keep your hands out from underneath the scanner unit. If you are scanning a photo: Place the photo facedown on the scanner glass. Creating a Photo Slideshow From the desktop, double-click the Lexmark Imaging Studio icon.
You will need this later to in order to network the printer. Repeat this step if necessary. Change the scanning resolution to a lower value Load an original document facedown on the scanner glass. Try one or more of the following: Press power button Make sure the printer is on by pressing Disconnect and reconnect the power cord Disconnect the power cord from the wall outlet, and then from the printer. Scanning a document using the computer Load an original document facedown on the scanner glass.
If you want each page image to be surrounded by a border, select Print Page Borders. Load an original document facedown on the scanner glass. Remove the memory cards in the Lexmark X4550 and the last step is the check message. If you are not sure which side is the printable side, see the instructions that came with the paper. The safety features of some parts may not always be obvious. Select a lower minimum photo size. Press Note: Pressing selects a setting.
Check paper size Make sure the paper size being used matches the size you selected. Using the Photo Card menu If necessary, press Photo Card, or insert a memory card or a flash drive into the printer. Click the Dialing and Sending tab. Press down on the cartridge carrier lever to raise the cartridge carrier lid. Make sure the sticker and tape have been removed. Note: If the carrier does not automatically move to the center, turn off the printer or unplug the printer from the power source and then carefully slide the carrier to the center. From the left pane of the Welcome screen, click Scan.
Press Press repeatedly until the size you want appears. Press Press repeatedly until the submenu item you want or the setting you want appears. Paper or specialty media misfeeds These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together. Press Press Start Color or Start Black. Therefore, take a good look at this tutorial for nothing to miss. Click Setup and diagnose printer.
Note: The mode is selected when the button light is on. Press Press repeatedly until Paper Size appears. Using Printing Preferences Opening Printing Preferences Printing Preferences is the software that controls the printing function when the printer is connected to a computer. Press Start Color or Start Black to print your photos. Click Transfer Photos to your computer using the Lexmark Imaging Studio. You can scan a document for faxing. Make sure the antenna points up.